Glow-worm Clearly Solar Vertical In-Roof Collector User Manual download pdf (Page 14)

Diagram 5.13

14964

TILE BAR

STRAP

5.3 Riveting the frame

Drill a 4.5 mm diameter hole through the ridge plates on the

marks on the left and right hand respectively, see diagram

5.12.

Rivet the ridge plate to the side section.

5.4 Tile Bars

Place the tile bars on the ridge plates.

Bend the metal bands and hook the tile bars to the roof batten

from the top, see diagram 5.13.

5.5 Covering the prole ends

Cover the side prole ends and the collector joints with the

prole end pieces, see diagram 5.1 for prole end location.

Fit the prole end pieces to the bottom of the collector edge

and then tilt them up, until they lock in the upper collector

edge, see diagram 5.14.

Diagram 5.14

14981

PROFILE END PIECE

COLLECTOR

EDGE

5 Single Collector Flashing Kit - 22

- 75

Diagram 5.12

15028

4,5

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

No comments

Glow-worm Clearly Solar Vertical In-Roof Collector User Manual Page 14