Glow-worm Ultimate 40FF User Manual download pdf (Page 15)

2000225231B

4 Flue and Appliance Preparation

Diagram 4.6

Diagram 4.7

FLUE

DUCT

BOILER

CENTRE

LINE

T MINUS 188mm

6833

6831

Diagram 4.8

LONG FLUE

TERMINAL

STANDARD FLUE

TERMINAL

Q PLUS 5mm

6829

4.6 Wall Mounting Bracket

Reposition the template, making sure of dimensional alignment

with the flue hole.

Mark the boiler fixing points and mounting bracket position, see

diagram 4.5.

Drill holes and plug, to suit No.12x2in wood screws, fit the

screws allowing sufficient clearance, about 5mm, to accept the

swing brackets, see diagram 4.5.

Secure the mounting bracket to the wall with No.12x2in wood

screws and plugs, see diagram 4.5.

4.7 Flue Duct

Mark the duct to the length required, this length allows for

expansion, see diagram 4.6 for rear flue and diagram 4.7 for

side flue, then cut square and remove any burrs.

4.8 Air Duct/Terminal

Mark the duct length, see diagram 4.8 for rear flue and diagram

4.9 for side flue, then cut square and remove any burrs.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

No comments

Glow-worm Ultimate 40FF User Manual Page 15