Glow-worm Micron 50FF User Manual download pdf (Page 27)

2000225227C

10 Replacement of Parts

Diagram 10.7

SECURING

SCREW

FAN

ASSEMBLY

RED

AIR TUBE

ELECTRICAL

CONNECTIONS

FAN

SECURING

SCREW (3)

7165

CLEAR

AIR TUBE

10.11 Air Pressure Switch, Part No. 227127 -

diagram 10.6

Gain Access as Section 5.2.

Remove the air pressure tubes and electrical connections from

the switch, release the screws and remove the switch.

When fitting the replacement make sure that the plastic tubes

are fitted as shown in diagram 10.6 and the electrical connections

are made, as diagram 9.4.

10.12 Fan, Part No. 227034 - diagram 10.7

Refer to Section 5.3.

Remove the electrical connections and disconnect the air

tubes.

Note: Remove the electrical connections by pulling insulation

boots only.

If top outlet installation: Remove air deflector, or it may just be

swung back by loosening the wing nuts, to enable fan assembly

to be removed, see diagram 8.7 and Section 5.3.

Remove the fan assembly securing screw at the front, then

withdraw the assembly.

The fan is secured to the flue hood by three screws.

The polarity of the electrical connections is not important.

Diagram 10.6

CLEAR

AIR TUBE

SECURING

SCREW (2)

AIR

PRESSURE

SWITCH

ELECTRICAL

CONNECTIONS

7227

RED

AIR TUBE

IMPORTANT:

REMOVE ELECTRICAL CONNECTIONS

BY GRIPPING THE BOOT ONLY

1 2 ... 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Glow-worm Micron 50FF User Manual Page 27

Comments to this Manuals

Related products and manuals for Water boiler Glow-worm Micron 50FF